Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Figure 251: Removing a rear fan module (B)
Ê Before replacing the rear fan holder, remove the second rear fan module
accordingly.
8.3.2.4

Concluding steps

Perform the following procedures to complete the task:
Ê Close the side / top cover as described in section
on page 115 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
TX300 S7 / RX350 S7
"Mounting the side cover" on page 122
Upgrade and Maintenance Manual
"Mounting the top cover"
132.
130.
Fans
(tower
399