13
Front panel and external
connectors
This chapter provides information on how to replace the front panel module and
optional front LAN connector board and front VGA connector.
Safety notes
V
CAUTION!
When inserting the front panel module into the server, ensure not to
●
pinch or strain any connected cables.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
For further information, please refer to chapter
●
information" on page
In this chapter
"Replacing the front panel module" on page 760
●
"Installing the front LAN connector" on page 778
●
"Removing the front LAN connector" on page 790
●
"Replacing the front LAN connector and board" on page 793
●
"Installing the front VGA connector" on page 796
●
"Removing the front VGA connector" on page 806
●
"Replacing the front VGA connector" on page 809
●
TX300 S7 / RX350 S7
51.
Upgrade and Maintenance Manual
"Important
759