Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 616

Processors
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect all external cables.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê If available, update the system board BIOS and the iRMC to the latest
version as described in section
BIOS and iRMC" on page
Ê Enable boot watchdog functionality as described in section
boot watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
616
133.
"Updating or recovering the system board
147.
165.
Upgrade and Maintenance Manual
132.
130.
"Connecting the server to
159.
"Enabling SVOM
"Enabling
TX300 S7 / RX350 S7