Installing The Slimline Odd Into The Extension Box - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Accessible drives
I
The front cover only needs to be removed in order to remove
accessible drive dummy covers (see section
drive dummy covers" on page
already installed in the server and will be removed in order to install
a slimline ODD or LSD module, skip this step.
Ê Remove the air duct as described in section
on page 100.
Ê Remove the system fan holder as described in section
system fan holder" on page
Ê If the HDD extension box is already installed in the server, disconnect all
cables from the HDD backplane and accessible devices and remove the
extension box as described in section
extension box" on page

12.6.1.3 Installing the slimline ODD into the extension box

Figure 499: Removing the slimline ODD dummy module
716
389.
322.
Upgrade and Maintenance Manual
"Removing accessible
656). If the HDD extension box is
"Removing the system air duct"
"Removing the 2x 3.5-inch HDD
"Removing the
TX300 S7 / RX350 S7