Handling Gpgpu Cables - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 310: Installing a PCI slot bracket (B)
Ê Clip on the PCI slot bracket clamp (1).
Ê Fold down the locking handle on the PCI slot bracket clamp until it locks in
place (2, see close-up).
9.4.2.6

Handling GPGPU cables

Ê If no GPGPU cards are to be reinstalled in the system, perform one of the
following two tasks:
Ê Secure the GPGPU power cables on the chassis wall with adhesive tape.
Ê Remove the GPGPU power cables from the power backplane as
described in section
484
"Removing the power backplane" on page
Upgrade and Maintenance Manual
189.
TX300 S7 / RX350 S7