Removing The Modular Lan Controller - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.2.3

Removing the Modular LAN controller

Figure 280: Detaching the Modular LAN controller
Ê If applicable, remove SFP+ transceiver modules from the Modular LAN
controller, as described in section
page 582.
Ê Press out on the locking latch to disengage the PCI slot bracket locking bar
(1, see close-up).
Ê Fold up (2) and remove (3) the PCI slot bracket locking bar.
446
"Replacing SFP+ transceiver modules" on
Upgrade and Maintenance Manual
TX300 S7 / RX350 S7