8.3.4.5
Concluding steps
Perform the following procedures to complete the task:
Ê In case of redundant fan configurations, reinstall all rear fan modules as
described in section
Ê Reinstall the air duct as described in section
on page
102.
Ê Close the side / top cover as described in section
on page 115
(rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section
"Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
TX300 S7 / RX350 S7
"Installing rear fan modules" on page
"Mounting the side cover" on page 122
Upgrade and Maintenance Manual
392.
"Installing the system air duct"
"Mounting the top cover"
132.
130.
Fans
(tower
407