Removing The 3.5-Inch Hdd Bay Top Cover - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Ê Remove the air duct as described in section
on page 100.
Ê Remove the system fan holder as described in section
system fan holder" on page

7.3.10.3 Removing the 3.5-inch HDD bay top cover

Figure 171: Removing the 3.5-inch HDD bay top cover (A)
Ê Remove five screws from the 3.5-inch HDD bay top cover (see blue arrows).
Ê Remove one screw from the intrusion switch holder (see orange arrow).
296
389.
Upgrade and Maintenance Manual
"Removing the system air duct"
"Removing the
TX300 S7 / RX350 S7