Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 841

Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "D2949 BIOS Setup Utilty for PRIMERGY
TX300 S7 / RX350 S7" reference manual available online at
http://manuals.ts.fujitsu.com (http://jp.fujitsu.com/platform/server/
primergy/manual/
Suite DVD 2 supplied with your PRIMERGY server.
Ê Locate the desired server as described in section
server" on page
Ê Shut down the server as described in section
page 71.
Ê Remove the AC power cords from the PSU cable brackets and disconnect
them from the system as described in section
from the mains" on page
Ê When working on a rack-mounted server, extend it out of the rack as
described in section
If further required, remove the server from the rack as described in section
"Removing the server from the rack" on page
Ê Open the side / top cover as described in section
on page 79 (rack server) or
server).
Ê Remove the air duct as described in section
on page 100.
Ê Remove the system fan holder as described in section
system fan holder" on page
TX300 S7 / RX350 S7
for the Japanese market) or from the ServerView
64.
72.
"Extending the server out of the rack" on page
"Removing the side cover" on page 88
389.
Upgrade and Maintenance Manual
System board and components
"Locating the defective
"Shutting down the server" on
"Disconnecting the server
77.
"Removing the top cover"
"Removing the system air duct"
"Removing the
76.
(tower
841