Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 370

Hard disk drives / solid state drives
Figure 231: Installing SAS expander board spacer bolts (B)
Ê Screw the four SAS expander board spacer bolts onto the mounting bolts as
shown:
A Spacer bolts with shoulder screw caps
B Spacer bolt with screw thread
Ê Reinstall the system board carrier as described in section
system board carrier" on page
Ê Reinstall the system board as described in section
board" on page
370
109.
863.
Upgrade and Maintenance Manual
"Installing the
"Installing the system
TX300 S7 / RX350 S7