Removing An Expansion Card - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

9.2.2.3

Removing an expansion card

Figure 266: Removing an expansion card (A)
Ê If applicable, remove SFP+ transceiver modules from the expansion card,
as described in section
Ê Press out on the locking latch to disengage the PCI slot bracket locking bar
(1, see close-up).
Ê Fold up (2) and remove (3) the PCI slot bracket locking bar.
TX300 S7 / RX350 S7
"Replacing SFP+ transceiver modules" on page
Upgrade and Maintenance Manual
Expansion cards and backup units
582.
425