Expansion cards and backup units
Figure 386: Routing the FBU cable
Ê Run the FBU cable through the cable guide (G) and along the drive bays as
shown.
9.7.3.6
Concluding steps
Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section
fan holder" on page
Ê Reinstall the air duct as described in section
on page
102.
Ê Close the side / top cover as described in section
on page 115
(rack server) or
server).
558
390.
"Mounting the side cover" on page 122
Upgrade and Maintenance Manual
"Installing the system
"Installing the system air duct"
"Mounting the top cover"
TX300 S7 / RX350 S7
(tower