Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 198

Hard disk drives / solid state drives
Never attempt to disassemble a hard disk or solid state drive.
●
For further safety information, please refer to chapter
●
information" on page
In this chapter
– 2.5-inch HDD / SSD subsystem
"2.5-inch HDD / SSD configurations" on page 199
●
"Installing 2.5-inch HDD / SSD modules" on page 214
●
"Removing 2.5-inch HDD / SSD modules" on page 219
●
"Replacing a 2.5-inch HDD / SSD module" on page 223
●
"Replacing a 2.5-inch HDD SAS backplane" on page 225
●
"Upgrading to 16x 2.5-inch HDD / SSD configurations" on page 242
●
– 3.5-inch HDD subsystem
"3.5-inch HDD configurations" on page 258
●
"Installing 3.5-inch HDD modules" on page 272
●
"Removing 3.5-inch HDD modules" on page 277
●
"Replacing a 3.5-inch HDD module" on page 282
●
"Replacing a 3.5-inch HDD SAS backplane" on page 284
●
"Upgrading to 8x 3.5-inch HDD configurations" on page 295
●
– HDD extension boxes
"HDD extension boxes" on page 309
●
– SAS expander board
"SAS expander board" on page 368
●
198
51.
Upgrade and Maintenance Manual
"Important
TX300 S7 / RX350 S7