Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 467

Figure 296: Securing the GPGPU card (A)
Ê Slide the GPGPU card mounting bracket towards the server rear until it
touches the GPU card (1).
Ê Secure the GPGPU card to the mounting bracket with one M3 x 4.5 mm
screw (2).
I
For easier access to the securing screw, remove the system fan
holder first (see section
page 389).
Ê Secure the GPGPU card to the upper rear edge of the chassis with two
M3 x 4.5 mm screws (3).
TX300 S7 / RX350 S7
"Removing the system fan holder" on
Upgrade and Maintenance Manual
Expansion cards and backup units
467