Installing A Rear Fan Module - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

8.3.1.3

Installing a rear fan module

V
CAUTION!
– Do not remove the air duct in order to install fan modules!
In the below figures, the air duct has only been removed for
illustration purposes.
– For fan redundancy and in order to satisfy cooling requirements,
always install both rear fan modules. Operation with only one rear fan
module is not possible.
Figure 247: Installing a rear fan module (A)
Ê Fit the first fan module into its bay in the rear fan holder as shown with its
label facing the server rear.
Ê Gently press down on the fan module until it locks in place (1).
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
Fans
393