15
Converting a tower server to a
rack server
Upgrade and Repair Units (URU)
Average task duration: 20 minutes
This chapter provides information on how to convert a tower server to a rack
model.
Safety notes
For further information, please refer to chapter
page
51.
15.1
Required tools
Preliminary and concluding steps: tool-less
●
Converting the server model:
●
– Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
"Important information" on
883