Removing Psu Modules; Required Tools - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

6.3

Removing PSU modules

Customer Replaceable Units (CRU)
Average task duration: 5 minutes
I
Note for servers using CMA (Cable Management Arm)
Since the installed CMA is blocking PSU modules, additional steps are
required in order to remove or replace PSU modules:
Ê Unlock the CMA stopper.
Ê Remove the CMA stopper with the mounted crossbar.
Ê Support the CMA stopper, the crossbar and the CMA arm including
cables with your right hand.
Ê Remove the PSU module and install a PSU dummy module into the
empty bay.
Ê Remount the complete assembly (CMA stopper, crossbar and CMA
arm) into the rail.
6.3.1

Required tools

Preliminary and concluding steps: tool-less
●
Removing the PSU module: tool-less
●
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
Power supply
179