Installing The Intrusion Switch Cable - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Cabling

16.3.4 Installing the intrusion switch cable

Figure 661: Attaching a rubber bumper to the front intrusion switch
I
In case of rack server configurations, a rubber bumper needs to be
attached to the front intrusion switch as described below. When working
on a tower server, please skip this step.
Ê Attach a rubber bumper (C26192-Y26-C43) to the front intrusion switch as
shown.
936 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7