Installing 3.5-Inch Hdd Modules; Required Tools; Preliminary Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Logical drive
Position
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
7.3.6

Installing 3.5-inch HDD modules

Customer Replaceable Units (CRU)
Average task duration: 5 minutes
7.3.6.1

Required tools

Preliminary and concluding steps: tool-less
●
Installing a 3.5-inch HDD module: tool-less
●
7.3.6.2

Preliminary steps

Before installing a 3.5-inch HDD module, perform the following steps:
Ê When working on a tower server, open the HDD bay cover as described in
section "Removing accessible drive and HDD bay covers" on page
Ê Locate the correct drive bay as described in section
configurations" on page
272
ServerView RAID Manager display name
number
0 HDD vendor name (1:0)
1 HDD vendor name (1:1)
2 HDD vendor name (1:2)
3 HDD vendor name (1:3)
4 HDD vendor name (1:4)
5 HDD vendor name (1:5)
6 HDD vendor name (1:6)
7 HDD vendor name (1:7)
8 HDD vendor name (1:8)
9 HDD vendor name (1:9)
10 HDD vendor name (1:10)
11 HDD vendor name (1:11)
258.
Upgrade and Maintenance Manual
91.
"3.5-inch HDD
TX300 S7 / RX350 S7