Main Memory - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

10

Main memory

This section provides information on how to install, remove or replace memory
modules.
Safety notes
V
CAUTION!
Do not install unsupported third party memory modules. For further
●
information on supported memory modules, refer to section
information" on page
Memory modules remain hot after shutdown. Wait for components to
●
cool down before installing or removing memory modules to prevent
burns.
Do not insert and remove memory modules repeatedly. Doing so may
●
cause failures.
Pressing out the securing clips on the memory module connector will
●
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
For further information, please refer to chapter
●
information" on page
In this chapter
"Memory sequence" on page 584
●
"Installing memory modules" on page 592
●
"Removing memory modules" on page 596
●
"Replacing memory modules" on page 599
●
TX300 S7 / RX350 S7
584.
51.
Upgrade and Maintenance Manual
"Basic
"Important
583