Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 949

No. Print
1 FAN6
2 FAN5
3 HDD LED
4 NC-SI
5 SAS 1-4
6 USB Stick
7 SMB 4
8 SATA 1
9 INTRUSION
10 FAN1
11 SATA 2
12 UFM
13 UPG-ROM
14 FAN2
15 FAN3
16 FAN2
17 TPM
18 USB INT 2
19 USB INT 1
20 SMB 1
21 FRONTPANEL
22 FRONT VGA
23 Front LAN
24 PWR HDD/ODD
25 PWR
26 PSU CONTROL
TX300 S7 / RX350 S7
Description
Fan connectors for hot-pluggable rear fans
(not used)
NCSI connector for Modular LAN cards
Onboard SAS connector (needs to be enabled
with onboard SAS enabling key)
(not used)
(not used)
SATA connector for accessible SATA drives
Intrusion switch cable connector
Fan connector for hot-pluggable system fan
SATA connector for accessible SATA drives
Connector for USB Flash Module (UFM)
Connector for onboard SAS enabling key (required
to enable onboard SAS connector SAS 1-4)
Fan connectors for hot-pluggable system fans
Connector for Trusted Platform Module (TPM)
USB 2.0 connectors for USB backup drives
Connector for Local Service Display (LSD)
Connector for front panel and front USB
connectors
Connector for optional front VGA connector
Slot for front LAN connector board
Power connector for HDD backplane or accessible
drives
System power connector
Management connector for PSU modules
Upgrade and Maintenance Manual
Appendix
949