Version History - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Version history

Issue number
0.5 / February 2012
1.0 / March 2012
1.1 / March 2012
1.2 / May 2012
1.3 / July 2012
1.4 / August 2012
1.5 / September 2012
1.6 / November 2012
1.7 / March 2013
1.8 / April 2013
TX300 S7 / RX350 S7
Reason for update
Preliminary draft version
Initial release
Updated and revised release
Revised the following sections: GPGPU mounting
sequence, Chassis ID Prom Tool download
description, Applying thermal paste
Revised / complemented the following sections:
"Handling the system air duct", "Expansion card
overview", "Mounting order for accessible drives",
"Installing mounting brackets to RDX and DAT72
backup drives"
Additional power cabling solution for 4x 3.5-inch HDD
expansion boxes, additional entry in expansion card
slot priority table, differentiation of expansion card
fixation methods
Revised / added initial notes in sections "Preparing
PCI slot openings" and "Installing mounting brackets
to RDX and DAT72 backup drives", revised "High
safety use" paragraph in section "Before reading this
manual", added notes on fan test in chapter "Fans"
Added cabling information on USB 3.0 RDX drives,
added fan test procedure
Added new section on GPGPU cards with passive
cooling
Revised cabling plans / instructions, additions to the
expansion card slot priority table
Upgrade and Maintenance Manual 33