Installing The Slimline Odd And Lsd Module Into The Hdd Extension Box - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Removing accessible drive covers
Figure 192: Removing an accessible drive covers
I
Removing accessible drive covers is illustrated by the example of the
tower server. In case of the rack front cover, the procedure is identical.
Ê Turn the front cover face down.
Ê Press in on the lugs on either side of the drive cover.
Ê Fold up (1) and remove the desired accessible drive covers (2).
7.4.2.4 Installing the slimline ODD and LSD module into the HDD
extension box
Ê If applicable, install the slimline ODD into the new 2x 3.5-inch HDD
extension box as described in section
extension box" on page
Ê If applicable, install the LSD module into the 2x 3.5-inch HDD extension box
as described in section
box" on page 721.
314
716.
"Installing the LSD module into the HDD extension
Upgrade and Maintenance Manual
"Installing the slimline ODD into the
TX300 S7 / RX350 S7