Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Accessible drives
Figure 489: Routing cables
Ê Run SATA cable T26139-Y3958-V205 along the drive bays and through the
cable clamp on the server floor as shown.
Ê Run the SATA cable through the cable guide.

12.5.1.8 Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section
fan holder" on page
Ê Reinstall the air duct as described in section
on page 102.
Ê If applicable, close the front cover and reinstall the ID card as described in
section "Closing the server" on page
700
390.
Upgrade and Maintenance Manual
"Installing the system
"Installing the system air duct"
112.
TX300 S7 / RX350 S7