Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 304

Hard disk drives / solid state drives
Ê Locate the three hooks on the HDD front panel (see close-up and black
numbers 1-3).
Ê Locate the corresponding installation slots on the server front (see white
numbers 1-3).
Ê Fit the three hooks on the HDD front panel into the slots in the server front.
Figure 181: Securing the 16x 2.5-inch HDD front panel
Ê Firmly press down on the HDD front panel until its upper edge is flush with
the chassis (see arrow).
Ê Secure the HDD front panel to the server front with four M3 x 4.5 mm screws
(see circles).
304 Upgrade and Maintenance Manual
TX300 S7 / RX350 S7