Installing The Modular Lan Controller - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
9.3.1.5

Installing the Modular LAN controller

Ê Remove the Modular LAN controller from its protective packaging.
I
For further instructions regarding controller settings, please refer to
the accompanying documentation.
Ê If applicable, attach the enclosed full height slot bracket to the Modular LAN
controller as described in section
page 435.
Figure 277: Installing the Modular LAN controller
Ê Carefully insert the Modular LAN controller into PCI slot 1 and press down
firmly until it is fully seated in the slot.
440
"Preparing the Modular LAN controller" on
Upgrade and Maintenance Manual
TX300 S7 / RX350 S7