Cabling; List Of Used Cables - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

16

Cabling

Safety notes
V
CAUTION!
Always hold cables by their connectors when disconnecting them.
●
Never pull on the cable to disconnect cables.
Ensure that none of the cables are scraped, strained or otherwise
●
damaged while replacing system components.
Immediately replace cables with damaged shielding.
●
Always use shielded network cables.
●
16.1

List of used cables

I
The numbers in the cable list correspond to those shown in the cabling
plans below.
No. Name
1 HDD Power Cable
2 PSU Signal Cable
3 HDD / ODD Power Cable 410 mm
4 System Power Cable
Backup Drive Power
5
Cable
6 ODD SATA Power Cable 410 mm
SAS Backup Drive
7
Power / Data cable
8A
Slimline ODD SATA
Power Cable
8B
Table 6: List of used cables
TX300 S7 / RX350 S7
Length
750 / 550 /
450 mm
300 mm
500 mm
410 mm
410 / 700
mm
400 mm
500 mm
Upgrade and Maintenance Manual
Number
Routing
(T26139-)
Power backplane to SAS
Y3952-V601
backplanes / HDD ext. box
Power backplane to system
Y4027-V1
board
SAS backplane to HDD
Y4029-V201 extension box or system
board
Power backplane to system
Y3758-V9
board
Backup drive to system
Y4029-V1
board or power backplane
Y3930-V601 ODD to SAS backplane
SAS Backup drive to system
Y3969-V401
board connector SAS 1-4
ODD to system board or SAS
Y3986-V302
backplane
Y3986-V305 ODD to SAS backplane
909