Avaya Communication Manager Administrator's Manual page 77

Allowing users to change CORs
You can allow specific users to change their Class of Restriction (COR) from their telephones
using a Change COR feature access code. You can also limit this feature by insisting that the
user enter a password as well as a feature access code before they can change their COR. The
Station Lock feature also allows users to change their own COR. For more information on the
Station Lock feature, see
Before you start:
Be sure that Change COR by FAC field is set to y on the System-Parameters
●
Customer-Options screen. Note that you cannot have both Change COR by FAC and
Tenant Partitioning enabled.
Be sure that each user (who you want to allow to change a COR) has a class of service
●
with console permissions. For more information about console permissions, refer to
of Service
To allow users to change their own class of restriction, you must define a feature access code
and can, optionally, create a password. For example, we will create a change COR feature
access code of *55 and a password of 12344321.
1. Type change feature-access-codes. Press Enter.
The Feature Access Code
2. Move the cursor to the Change COR Access Code field.
3. Type *55 in the access code field.
4. Press Enter to save your changes.
Now we have to define the password.
5. Type change system-parameters features. Press Enter.
The Feature-Related System Parameters
Automatic Exclusion Parameters section.
Station Lock
on page 827.
screen appears.
Controlling the Calls Your Users Can Make and Receive
on page 79.
screen appears. Press Next Page to find the
Class
Issue 2.1 May 2006 77