Avaya Communication Manager Administrator's Manual page 82

Managing Telephones
Instructions
!
CAUTION:
You can destroy your hardware if you attempt to connect an analog telephone to
CAUTION:
a digital port.
To associate a telephone with existing x-port station administration, complete the following
steps from the telephone you want to install:
1. Plug the telephone into the wall jack.
2. Lift the receiver and continue if you hear dial tone.
3. Dial #*nnnn, where nnnn is the extension number of the telephone you are installing.
4. Hang up after you receive confirmation tone.
5. Dial a test call to confirm that the telephone is in service.
If possible, call a telephone with a display so the person answering can confirm that you
entered the correct extension number.
6. Repeat the process until all new telephones have been installed.
7. For security reasons, you should disable this feature when you are done. At the system
administration terminal type change system-parameters features to access the
Feature-Related System Parameters screen.
8. Type n in the Customer Telephone Activation (CTA) Enabled field.
9. Press Enter to save your changes.
10. Type save translations. Press Enter to permanently save the changes.
a. Fixing problems
If you misdial and the wrong extension is activated for the telephone you are using, use
the terminal translation initialization (TTI) unmerge feature access code to "uninstall" the
telephone before you try again.
82 Administrator Guide for Avaya Communication Manager