Table of Contents
Advertisement
1. Press the <Menu> button, use the <◄/►> buttons and LCD shows [Fax Report – Address Book]
2. Press <Set> to confirm your setting.
To configure the setting for [Broadcast ], do the following:
1. Press the <Menu> button, use the <◄/►> buttons and LCD shows [Fax Report – Broadcast]
2. Press <Set> to confirm your setting.
To configure the setting for [Tx Result], do the following:
1. Press the <Menu> button, use the <◄/►> buttons and LCD shows [Fax Report – Tx Result]
2. Press <Set> and use the <◄/►> buttons to select [Tx Result – Always], [Tx Result – No ], [Tx
Result – On Error]
3. Press <Set> to confirm your setting.
Notes:
•
Select [Tx Result – Always] : Print fax log either fax process success or fail.
•
Select [Tx Result – No ] : Disable log print function, either fax process success or fail
•
Select [Tx Result – On Error] : Print process fail fax log only.
To configure the setting for [On/off History], do the following:
1.
Press the <Menu> button, use the <◄/►> buttons and LCD shows [Fax Report – On/off History]
2.
Press <Set> to confirm your setting.
8.8.3
Scan Report
Scan Report can provide scan status and verify options setting through by print a status sheet.
To configure the setting for [Scan Report-Panel Setting], do the following:
1.
Press <Scan> to select scan mode from control panel.
2.
Press the <Menu> and <▼> button, and LCD shows [Scan Report – Panel Setting]
3.
Press <Set> to confirm your setting and start to print status report.
8.9 Job canceling
To interrupt a running job no mater what job is processing under stand along or initiated from host application.
8.9.1 Jobs initiated from OP Panel
1. Cancel a Scan job
Procedures
Press < Stop> to enter cancel menu.
Press<◄> or <►> to select the scan job you want to cancel while multiple jobs are
proceeding.
The scan job you can select to cancel are included as bellows,
All manuals and user guides at all-guides.com
Scan To PC
Scan To USB
Scan To FTP1
Scan To FTP2
- 82 -
Advertisement
Table of Contents
