Step 5 Confirming The Copy Job In Job Status; Stopping The Copy Job - Fuji Xerox ApeosPort-VI C7771 Quick Reference

3 Basic Operation
5
When all documents have been scanned, select
[Last Original].

Step 5 Confirming the Copy Job in Job Status

If copies are not output after you start the copy job, the job may be in pending status. Use
the following procedure to confirm the job status.
1
Press the <Job Status> button.
2
Confirm the job status.
3

Stopping the Copy Job

To cancel a copy job in progress, use the following procedure.
1
Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2
Select [Delete].
If [Delete] does not appear on the screen:
1
Press the <Job Status> button.
66