Installation Requirements; General Installation Requirements - Fuji Xerox C60 Instruction Manual

IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit)
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + Square Fold Trimmer
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + GBC AdvancedPunch
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + GBC AdvancedPunch + Square Fold Trimmer
IOT with Oversize High Capacity Feeder (OHCF)
Configuration
IOT + OHCF + Catch Tray
IOT + OHCF + C3 Finisher
IOT + OHCF + Finisher C3 Finisher (with Booklet Maker)
IOT + OHCF + Finisher C3 Finisher (with Booklet Maker & folder unit)
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker )
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + Square Fold
Trimmer
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + GBC
AdvancedPunch
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + GBC
AdvancedPunch + Square Fold Trimmer
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit)
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
Square Fold Trimmer
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
GBC AdvancedPunch
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
GBC AdvancedPunch + Square Fold Trimmer
Where a device is installed adjacent to an access way, additional space over and above that specified in this document
may be required. Space required for access ways is dependent on circumstance, and it is recommended that the local
statutory body be contacted for advice.

Installation Requirements

This section contains information on preparing for the delivery and installation of the Color C60 / C70 Printer

General Installation Requirements

•
The product should not be exposed to direct sunlight, external heat sources, excessive dust or vibration.
•
Do not operate the machine in a poorly ventilated room.
•
The machine must be located on a stable and level floor.
•
The site clearances must conform to the specifications stated in "Space Requirement (Minimum Service
Clearance)"
•
At least 1 x network drop required for each Color C60/C70 installation. Additional drops may be required if
product is configured with an external print server.
3637 2483
4419 2483
3942 2483
4724 2483
Min. Site Space (mm)
Depth (with
Site Width
Integrated Fiery)
3080 2483
3510 2483
3569 2483
4040 2483
4065 2483
4847 2483
4370 2483
5152 2483
4265 2483
5047 2483
4570 2483
5352 2483
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Comment
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
Non-Movable Installation
6