Table C2-13. Valid Options For The Rip_Advertise Parameter; Rip_Default_Route; Rip_Advertise; Rip_Auth - Bay Networks 5390 Administering

rip_advertise

This interface parameter defines the networks for which the Model 5390 server will advertise routes.
Table C2-13 lists the valid options; the default is all.

rip_auth

This Model 5390 parameter contains the password that controls authentication for RIP packets. The
string size ranges from 0 to 16 characters. The Model 5390 server displays this parameter's value as
"<set>" if a password is entered or "<unset>" if a null string is entered. When "<unset>,"
authentication is turned off and all RIP packets are accepted. The default is a null string ("").

rip_default_route

This interface parameter allows the Model 5390 server to advertise that it is the default router. Valid
values are 0 through 15, or off. A value of 1 through 15 indicates the hop count that will be advertised.
A value of 0 or off turns off the advertisement. The default is 0.
893-741-B

Table C2-13. Valid Options for the rip_advertise Parameter

Option Description
access_spec Uses the form [include | exclude] network_list where
include means advertise only the networks in network_list,
and exclude means advertise all networks except those in
network_list. The list can contain up to eight network
addresses.
none Turns off advertising for the interface.
all Advertises all networks over the interface.
Configuration Parameters
C2-53