Bay Networks 5390 Administering page 684

Using the CLI Commands
C3-8
Table C3-3. Privileged Model 5390 VMS Commands (continued)
Command
define server
login prompt
define server
maintenance password
define server MOP host
define/set/change port
modem control
define port name
define/set/change
port noloss
define/set/change port
output flow control
define/set/change
port parity
define/set/change
port password
define port
session limit
define/set/change
port speed
define/set/change
port stop bits
define/set/change
port type
define server
multicast timer
define server name
Description
Defines or changes the prompt that requests the
user's login password.
Defines or changes the user password required
for remote applications such as NCP and TSM.
Requires the physical Ethernet address for the
preferred VMS host.
Specifies whether or not the Model 5390 server
manipulates modem signals.
Specifies the name of the port.
Specifies whether or not the port will store data
in its type ahead buffer while waiting for a
session connection to be made. If so, it will then
pass the data to the connection partner.
Specifies output flow control.
Specifies whether or not the port will provide a
parity bit with each character for error checking.
Specifies whether or not a user requires a
password to log in to the Model 5390 server.
Limits the number of connected sessions on the
port.
Specifies the port speed in bits per second.
Tells the Model 5390 server to use 1, 1.5, or 2
stop bits when outputting a character.
Defines or changes the type of terminal
connected to your port, the ports specified in the
port-list, or all ports.
Specifies time to elapse between service
announcement transmissions.
Specifies a 1 to 16 character name for the
Model 5390 server.
893-741-B