Bay Networks 5390 Administering page 470

Using Model 5390 Security
parameter settings and their effect on
Model 5390 activity.
Table A15-11.PPP Security Parameters and their Effect on Model 5390 Activity
If:
enable_security = N
ppp_security_protocol = n/a
slip_ppp_security = n/a
enable_security = Y
ppp_security_protocol = none
slip_ppp_security = Y
enable_security = Y
ppp_security_protocol = none
slip_ppp_security = N
enable_security = Y
ppp_security_protocol = pap
slip_ppp_security = Y
enable_security = Y
ppp_security_protocol = pap
slip_ppp_security = N
A15-50
Then:
Request no PPP security incoming.
Use ppp_username_remote and ppp_password_remote
for outgoing (if not set and remote side of link demands
PAP or CHAP, connection fails).
Request no PPP security incoming.
Use ppp_username_remote and ppp_password_remote
for outgoing (if not set and remote side of link demands
PAP or CHAP, connection fails).
Log accesses in acp_logfile.
Request no PPP security incoming.
Use ppp_username_remote and ppp_password_remote
for outgoing (if not set and remote side of link demands
PAP or CHAP, connection fails).
Do not log accesses in acp_logfile.
Use ACP for incoming user name and password.
Use ppp_username_remote and ppp_password_remote
for outgoing (if not set and remote side of link demands
PAP or CHAP, connection fails).
Log accesses in acp_logfile.
Use port_password for incoming password.
Use ppp_username_remote and ppp_password_remote
for outgoing (if not set and remote side of link demands
PAP or CHAP, connection fails).
Do not log accesses in acp_logfile.
893-741-B