Bay Networks 5390 Administering page 839

Table D1-10. Asynchronous Port Parameters (continued)
Parameter
short_break
slip_allow_dump
slip_load_dump_host
slip_mtu_size
slip_no_icmp
slip_ppp_security
slip_tos
speed
subnet_mask
stop_bits
893-741-B
Values Default
Y or N Y
Y or N Y
Internet 0.0.0.0
address
small or small
large
Y or N N
Y or N N
Y or N N
autobaud, 9600
50, 75, 110,
134.5, 150,
200, 300,
600, 1200,
1800, 2000,
2400, 3600,
4800, 7200,
9600, 19200,
38400,
57600,
115200
subnet mask 0.0.0.0
1, 1.5, or 2 1
Description
When enabled, the Model 5390 server returns
the user to the CLI prompt after receiving a
break shorter than two seconds.
Enables/disables dumping across a SLIP link.
Defines the host from which the Model 5390
server receives a load or to which the
Model 5390 server dumps over the SLIP link.
Forces SLIP interface to use large (1006) or
small (256) maximum transmission units.
Discards any ICMP packets directed to the
SLIP link.
Enables/disables dialup SLIP/PPP access via
ACP.
When enabled, the Model 5390 server sends
interactive traffic before any other traffic.
Defines the speed of the asynchronous line
between the device and the Model 5390 server.
Defines the subnet mask for an async
SLIP/PPP interface.
Specifies the number of bit time intervals
between successive characters.
Software Reference
D1-43