Tmux_Max_Mpx; Tni_Circuit_Id; Tni_Clock; Tni_Esf_Fdl - Bay Networks 5390 Administering

Configuration Parameters

tmux_max_mpx

This Model 5390 parameter specifies the largest user packet that can be placed in a TMux packet.
The Model 5390 server does not multiplex larger packets, but passes them directly to the IP layer.
Allowable values are 5 through 65535; the default is 700.

tni_circuit_id

This T1 parameter stores the T1 circuit identifier string. The T1 circuit identifier string comes from
the service provider and is used for customer service calls. The parameter setting is a string of up
to 120 characters. The default setting is the null string.

tni_clock

This T1 parameter sets the clock for the T1 Network Interface. Parameter settings include loop
(service provider), local (Model 5390), external (T1 Drop/Insert Interface). The default setting is
loop.

tni_esf_fdl

This T1 parameter sets the T1 facilities data link (FDL) format. The FDL format is used in
conjunction with the ESF format and determined by the service provider. The parameter settings
include ANSI (ANSI T1.403) and AT&T (AT&T TR54016) standard formats.

tni_framing

This T1 parameter controls which super frame format is used on the
T1 Network Interface. Parameter settings include d4 (super frame) and esf (extended super frame).
The default setting is esf. The value for tni_framing may or may not be the same as tdi_framing.

tni_line_buildout

This T1 parameter sets the Line Build-Out (LBO) value. The Channel Service Unit (CSU) portion
of the T1 Network Interface requires the administrator to configure a LBO value. The service
provider will supply a value measured in decibels (dB) based on the amount of cable loss from the
service provider's location to the Model 5390 server. Parameter settings include 0, 7.5, 15, and 22.5.
The default is 0.
C2-66 893-741-B