Bay Networks 5390 Administering page 820

Software Reference
Table D1-2. Model 5390 Parameters (continued)
Parameter
ipencap_type
ip_forward_broadcast
ipx_do_checksum
ipx_dump_password
ipx_dump_path
ipx_dump_username
ipx_file_server
ipx_frame_type
keep_alive_timer
lat_key
D1-24
Values Default
ethernet or ethernet
ieee802
Y or N N
Y or N N
0–16 chars. <unset>
0–100 chars. No default
0–48 chars. No default
0–48 chars. No default
ethernetII, raw802_3
raw802_3,
802_2,
802_2snap
10–255 20 seconds
unique value no default
Description
Sets the IP encapsulation type.
Enables the Model 5390 server to
scan the interface list and copy
broadcast packets.
Controls whether or not the
Model 5390 server enables an IPX
checksum.
Controls whether or not the
Model 5390 server enables an IPX
checksum.
Specifies the full pathname that
stores the uploaded Model 5390
dump image on the Novell file
server.
Provides a user name for logging
on to the Novell file server before
the Model 5390 server sends a
dump file to the server.
Contains the name of the Novell
file server from which the
Model 5390 server boots.
Defines the framing used for IPX
packets on the Ethernet interface.
The time interval, in seconds,
between the transmission of
identification packets during times
of network inactivity.
Enables/disables the LAT protocol
as well as LAT-specific
Model 5390 parameters.
893-741-B