Modem - Bay Networks 5390 Administering

Using the CLI Commands

modem

The superuser modem command lists the modem types supported by the Model 5390 server. The
Model 5390 server supports a modem type if it is defined in the modem section of the configuration
file and at least one of the Model 5390 ports has the configuration parameter type_of_modem set
to that modem type. The syntax is:
modem [–al]
• Entering modem without arguments lists only the modem types used on this system.
• Entering modem –a lists the modem types that are used and each of the strings specified for
the modem(s).
• Entering modem –l lists the names of all of the modems defined in the configuration file but
not used on this system.
Sample displays for the modem, modem –a, and modem –l commands look like this:
annex# modem
type_of_modemS1200
type_of_modemUSR_144
annex#modem –a
type_of_modemS1200
ready_status0
connect status1 10 5 11 12 13 14 15 48 49 50
reset_cmdATZS0=1
setup_cmdATE1V0Q0X1S0=1
dial_cmdATDT
timeout40 seconds
retry 2
type_of_modemUSR_144
ready_status0
connect status1 5 10 13 14 15 16 17 18 19 20 21 25 43
reset_cmdATZS0=1
setup_cmd ATE1Q2V0X1&B1&C1&D2&H1&I0&K0&R2S0=1
dial_cmdATDT
timeout90 seconds
retry 2
annex#
C3-30 893-741-B