Bay Networks 5390 Administering page 842

Software Reference
PPP-specific Asynchronous Port Parameters
Table D1-13 lists PPP-specific Asynchronous Port parameters
Table D1-13. PPP-specific Asynchronous Port Parameters
Parameter
allow_compression
dialup_addresses
local_address
metric
ppp_acm
ppp_mru
ppp_ncp
ppp_password_remote
ppp_security_protocol
ppp_username_remote
remote_address
slip_ppp_security
subnet_mask
D1-46
Values Default
Y or N N
Y or N N
IP 0.0.0.0
Integer 1
0x00000000t 0x00000000
o 0xffffffff
64–1500 1500
lpcp, atcp, all all
<unset> or <unset>
a string
pap, none none
<unset> or <unset>
a string
IP address 0.0.0.0
Y or N N
Internet 0.0.0.0
subnet mask
.
Description
The Model 5390 server uses TCP/IP header
compression if the PPP link's end point
initiates compression.
Enables/disables requesting dial-up
address from ACP.
Defines the IP address for the port
(Model 5390 side).
Defines the hop count to the remote end of
the serial line.
Specifies which of the first 32 characters in
a TCP/IP packet will be escaped before
being sent to the network.
Defines the maximum receive unit used
with PPP.
Specifies which protocol to run on the
interface.
Defines a PPP port user's password as a
string.
Enables PAP for PPP ports.
Defines the PPP port user's name as a
string.
Defines the IP address for the host at the
remote end of the serial line.
Enables/disables dial-up access
via ACP.
Defines an Internet subnet mask for the
interface.
893-741-B