Local_Address; Location; Lock_Enable - Bay Networks 5390 Administering

local_address

This asynchronous port parameter defines the IP address for the asynchronous port on the Model
5390 server side of the link. This IP address is used only when the mode parameter is set to slip or
ppp. The default is 0.0.0.0.

location

This asynchronous port parameter defines an asynchronous port location or description that displays
with the CLI who command. The string size ranges from 0 to 16 characters. The default is a null
string ("").

lock_enable

This Model 5390 parameter enables any port to use the Model 5390 Interface for VMS
Environment's lock command. A Y enables this parameter, an N disables it. The default is N.
893-741-B
Table C2-8. Valid Options for the load_dump_sequence Parameter
Option Description
self Instructs the Model 5390 server to boot its image from the Flash
ROMs. Because the Model 5390 server cannot dump back to
itself, when booting via self, always have a secondary load/dump
interface by setting load_dump_sequence to self,net or
self,slnn.
Configuration Parameters
C2-33