Bay Networks 5390 Administering page 812

Software Reference
Table D1-1. All Parameters (continued)
Parameter
rip_recv_version
rip_routers
rip_send_version
rip_sub_accept
rip_sub_advertise
routed
rwhod
security_broadcast
server_capability
server_name
service_limit
session_limit
short_break
D1-16
Values Default
1, 2, both both
router_list, all all
1, 2, compat-
compatibility ibility
Y or N Y
Y or N N
Y or N Y
Y or N Y
Y or N Y
all, image, none
motd, none
string physical
Ethernet
address
appended
to string
LAT_
16–2048 256
1–1152 1152
Y or N Y
Description
Controls which RIP version the
Model 5390 server accepts.
Forces RIP to direct periodic RIP updates
to a list of routers.
Controls which RIP versions the
Model 5390 server sends.
Accepts or rejects subnet routes.
Advertises the subnet routes.
Enables/disables the RIP routing daemon.
Enables/disables listening for RWHO
broadcasts.
Enables/disables broadcasting for a
security server host in case preferred hosts
are not available.
Allows the Model 5390 server to act as a
load host.
A string of characters used to name the
Model 5390 server in the LAT protocol.
The upper bound on the number of
services that the Model 5390 server can
maintain in its local service table.
Specifies the maximum number of active
sessions the Model 5390 server allows at
one time.
When enabled, the Model 5390 server
returns the user to the CLI prompt after
receiving a break shorter than two seconds.
893-741-B