Bay Networks 5390 Administering page 800

Software Reference
Table D1-1. All Parameters (continued)
Parameter
authorized_groups
autobaud
backward_key
banner
broadcast_addr
broadcast_direction
bypass
chap_auth_name
char_erase
circuit_timer
cli_imask7
cli_inactivity
D1-4
Values Default
enabled or all disabled
disabled
Y or N N
string ""
Y or N Y
all zeros or 0.0.0.0
all ones
network or port port
Y or N Y
A string of 1–16 chap
characters
Y or N Y
1–25 8
(80 ms)
Y or N N
0–254 or 0 (off)
immediate
Description
Specifies which remote group codes are
accessible to users on a particular
Model 5390 port.
Determines whether or not the Model 5390
server automatically detects line speed
when a connection is opened, and whether
or not it sets matching terminal port
characteristics on the next login.
Reopens the next lower numbered session
from within the current session without
returning to local mode.
Enables/disables the Model 5390 banner
and message-of-the-day.
Defines the Internet address for use when
broadcasting.
Defines the direction of administrative
broadcasts for slave ports.
T1 parameter used to take the T1 engine
off the network.
Defines the entry used for the Name field
of a CHAP challenge.
Enables/disables echoing character erase
for a CRT.
The time interval in tens of milliseconds
between the transmission of LAT packets.
Enables/disables masking eight-bit CLI
input to seven bits.
Sets the amount of time that the
Model 5390 server waits before hanging
up the port after it becomes idle.
893-741-B