Bay Networks 5390 Administering page 838

Software Reference
Table D1-10. Asynchronous Port Parameters (continued)
Parameter
ppp_ipx_node
ppp_mru
ppp_ncp
ppp_password_remote
ppp_security_protocol
ppp_username_remote
printer_host
printer_name
prompt
ps_history_buffer
redisplay_line
remote_address
reset_idle_time_on
D1-42
Values Default
00000000000 Ethernet
0 to address
fffffffffffe plus one
64–1500 1500
ipcp, atcp, all all
<unset> or <unset>
a string
pap- none
chap,
pap,
none
<unset> or <unset>
a string
Internet 0.0.0.0
address
valid name no default
coded string ""
0–32767 0
(disabled)
control char. ^R
sequence
Internet 0.0.0.0
address
input or input
output
Description
Specifies a string of 12 hexadecimal digits
representing the 6-byte, nonzero node number
the Model 5390 server suggests for the node
number of the remote PC client on an IPXCP
(IPX over PPP) link.
Defines the maximum receive unit used with
PPP.
Specifies which protocol runs on the interface.
Defines a PPP port user's password as a string.
Enables password authentication protocol for
PPP ports.
Defines a PPP port user's name as a string.
Specifies the IP address or fully qualified
domain name of a machine running a
Berkeley-style lpd server.
Specifies the name of the printer to which
dumps are sent.
Defines a port-specific CLI prompt.
Specifies how much data to buffer on a slave
port.
Defines the reprint line character.
Defines the Internet address for the host at the
other end of the serial line.
Resets the idle timer on input or output.
893-741-B