Chapter 2 Installing The Remote Annex 4000; Before You Begin; Table 2-1. Remote Annex 4000 Configuration Options - Bay Networks Remote Annex 4000 Hardware Installation Manual

Before you Begin

Chapter 2 Installing the Remote Annex 4000
T
his chapter contains a description of how to install your Remote
Annex 4000 hardware on your Ethernet network. Installing the
Remote Annex 4000 consists of:
Connecting a LAN.
Connecting a Console Terminal.
Connecting Serial Devices.
Connecting a Parallel Printer.
Powering Up and Testing the Remote Annex 4000.
Installing the Software and Loading the Operational Image.
Auto-initializing the ROMs.
Self-booting the Remote Annex 4000.
Invoking a Console Monitor.
The Remote Annex 4000's software and operational image can be
installed on four different devices.
configurations the Remote Annex 4000 supports.
Table 2-1. Remote Annex 4000 Configuration Options
Device on which the Operational
Software and Image is installed
Novell Server
UNIX Load Host
VAX VMS Load Host
Self-Boot Unit (contains Flash)
Remote Annex 4000 Hardware Installation Guide
Table 2-1 outlines the different
Remote Annex
4000 Must be Input Device used to
Connected to Enter Installation
the Network Parameters
Yes PC on the network
or Console
No Console
Yes Console
No Console
2-1