Tdi_Distance; Tdi_Framing; Tdi_Line_Code; Telnet_Crlf - Bay Networks 5390 Administering

Communications server

Hide thumbs Also See for 5390:

Table of Contents

Conﬁguration Parameters

tdi_distance

This T1 parameter deﬁnes the distance, in feet, of the cable that runs from the T1DII to the Private

Branch Exchange (PBX) or other equipment. The parameter setting is an integer from 0 to 655. The

default setting is 0.

This T1 parameter controls which super frame format is used on the T1 Drop/Insert Interface. The

parameter settings are d4 (super frame) and esf (extended super frame). The default setting is esf.

The value for tdi_framing may or may not be the same as tni_framing.

This T1 parameter selects the line code to be used on the T1 Drop/Insert Interface (T1DII). The

device connected to the T1DII determines which line code to use. The parameter settings are ami

and b8zs. The default setting is b8zs.

This asynchronous port parameter converts a carriage return in a Telnet session to a carriage return

followed by a line feed. When disabled, a carriage return translates to a carriage return followed by

a null string. A Y enables this parameter, an N disables it. The default is N.

This asynchronous port parameter deﬁnes the character that returns a CLI user to the telnet prompt.

Setting this parameter to U disables the Telnet escape character. The default is

This asynchronous port parameter identiﬁes the type of terminal using the CLI connection. You

must enter a valid terminal type for the host.The Model 5390 server passes the terminal type setting

to the host. The string size ranges from 0 to 16 characters. The default is a null string ("").