Table C2-8. Valid Options For The Load_Dump_Sequence Parameter; Line_Erase; Load_Broadcast; Load_Dump_Gateway - Bay Networks 5390 Administering

Communications server

Hide thumbs Also See for 5390:

Table of Contents

Conﬁguration Parameters

This asynchronous port parameter allows the Model 5390 server to echo line erase for a video

terminal. When enabled, the Model 5390 server erases all characters on the line and moves the

cursor back to the beginning of the line. When disabled, the Model 5390 server echoes the line erase

character for hard-copy terminals, making the deleted line visible and positioning the print head at

the beginning of the next line. The line erase occurs only at the CLI level. A Y enables this parameter,

an N disables it. The default is Y.

This Model 5390 parameter deﬁnes, during a boot, whether or not the Model 5390 server requests

the conﬁguration or message-of-the-day ﬁles from other hosts on the network if any or all of the

ﬁles are not available on the preferred load host. A Y enables this parameter, an N disables it. The

default is Y.

This Model 5390 parameter speciﬁes the gateway's IP address. A gateway is required if the preferred

load or dump host is on a different network or subnet than the Model 5390 server. The default is

0.0.0.0 (no gateway).

This Model 5390 parameter speciﬁes available network interfaces (Ethernet, SLIP, or self) and the order

in which they are used for a down-line load or an up-line dump. You can list more than one interface by

using commas to separate interface names. Table C2-8 describes the valid options.

Valid Options for the load_dump_sequence Parameter

For use with a local area network. This is the default value.

For use with a SLIP line, where nn is the number of the serial