Bay Networks 5390 Administering page 514

Network Administration
The netstat –ip command display looks like this:
5390_01# netstat –ip 5
If compression is set, the values that appear in the display are
Max–slot–id and Comp–slot–id. These values are sub-options of VJ compression.
B1-6
*** LCP Options ***
local
mru 1500
auth type none
lqm none
acfc off
accm 0xffffffff
magic none
pfc off
*** NCP (IPCP) Options ***
local
ip-addresses 0.0.0.0
compression none
*** State Information ***
LCP: Open
Security: CHAP AACK Sent, CHAP AACK Rcvd
NCP (IPCP): Open
Table B1-3. Field Definitions for the netstat –ip Command
Field
local
remote
[xxx]
LCP and
NCP (IPCP) Options
Closed
Request sent
ACK received
remote
1500
none
none
off
0xffffffff
none
off
remote
[ANX] 0.0.0.0
15/1 none
Definition
Refers to the Model 5390 server.
Refers to the peer.
The origin of the value for ip–addresses:
ANX=param; REM=peer–defined; and
ACP=from security server ACP dial–up addresses.
Shows the current and the prior state of the
connection. Any current setting other than Open
indicates the link is not up. The states are:
The layer has shut down via an administrative or
peer request.
The Model 5390 server has sent a configure
request and is waiting for an answer.
The Model 5390 server has received a configure
ACK and is waiting for a configure request.
[ANX]
15/1
893-741-B