Bay Networks 5390 Administering page 848

Software Reference
Table D1-17. CLI Commands (continued)
Command Arguments
ipxroute add {default |network} gateway hops ticks
replace {default |network} gateway hops ticks
delete {default | network} gateway
jobs
kill [%] [%, +, –, number, hostname]
lock [time-out]
netstat [–AaCfgimnpQRrSstxz]
ppp
queue [[[–h hostname] [–s service] [–p port]],
[–r entry_id]]
rlogin hostname [–l user]
services [–vh] service hostname
slip
stats [–smp [ports][time] |[–op ]
stats -T [ current | total | all | interval_set |
clear_alarm ]
stty [parameter [value]]
su
telnet [[–rst] host [port]]
tn3270 [host [port]]
tstty host [–l user_name] [port]
who [[h=]host | [u=]user |[p=]port
| @host |user@host | –l @host]
D1-52
Description
Sets up routing information for IPX links.
Displays a list of current jobs.
Terminates a job.
Locks a port.
Displays network statistics.
Converts a CLI port to a PPP port.
Displays information about queued HIC requests
or removes a HIC request from the queue.
Connects to a host using rlogin.
Displays LAT services that have been advertised
by LAT hosts.
Converts a CLI port to a SLIP port.
Displays Model 5390 statistics.
Displays the status and statistics of the T1
Network Interface.
Displays and modifies CLI
port parameters.
Enters and exits superuser administrative mode.
Connects to a host using telnet.
Connects to an IBM VM/CMS or MVS host
using the tn3270 variation of the Telnet protocol.
Connects to the specified host using the TSTTY
protocol.
Displays information about current users of
Model 5390 ports.
893-741-B