Table C3-17. The Ping -T Command Display - Bay Networks 5390 Administering

Using the CLI Commands
annex# ping –t 132.254.33.4
PING hobbes: 56 data bytes line 1
C3-42
Dir Router
>>> 132.254.99.2
>>> 132.254.33.3
<<< 132.254.99.3
<<< 132.254.66.2
64 bytes from 132.254.33.4: time=10. ms
Table C3-17. The ping –t Command Display
Line Description
line 1 Indicates that ping –t has started.
line 2 Contains the display header.
line 3 Indicates that Router 1 was the packet's first hop on the path to
the ping –t destination. The interface over which Router 1
forwarded the outbound packet has an IP address of
132.254.99.2, a speed of 19200 bits per second, and can transmit
packets of up to 1024 bytes in length without fragmenting them.
line 4 Indicates that Router 2 was the packet's second hop on the path
to the ping –t destination. The interface over which Router 1
forwarded the outbound packet has an IP address of
132.254.33.3, a speed of 10000000 bits per second, and can
transmit packets of up to 1500 bytes in length without
fragmenting them.
line 5 Indicates that Router 2 was the return packet's first hop on the
way back to the ping –t source. The interface over which Router
2 forwarded the packet has an IP address of 132.254.99.3, a
speed of 19200 bits per second, and can transmit packets of up
to 1024 bytes in length without having to fragment them.
Hops Speed (b/s)
1 19200
2 10000000
1 19200
2 10000000
MTU line 2
1024 line 3
line 4
1500
line 5
1024
1500 line 6
line 7
893-741-B